Digital wall clocks configuration can be done easily. The Ethernet NTP digital wall clock can be configured from a telnet session. From any PC on your network, logon to the device. They can then be configured using few simple commands.
The accurate display is obtained from a NTP (network time protocol) or a SNTP (simple network time protocol). Both the NTP and SNTP can be internet/Intranet based. If you give your digital wall clocks an IP address then they will automatically synchronize with that IP's time settings.
The digital wall clocks can be provided in one or two display formats with four or six digit units. A four digit device will display hours and minutes only. A six digit device will display hours, minutes and seconds. The Ethernet NTP digital clocks can be configured for EU daylight savings using commands.
The LED digital wall clock comes with four or six digit formats. The four digit LED clock units display hours and minutes. The six digit units display hours, minutes and seconds. Both the LED clock units have 4 inch high LED digits. These digits can be read easily even from far distance of 50m.
Most of these clocks will have PoE (power over Ethernet) so in the event of a power shortage you won't lose time. It also makes installation easier. The clock takes the power from a CAT5 network cable and doesn't need a mains outlet near it.
If you have a network that supports PoE then you can simply plug the clock in and begin to use it. If you do not have a PoE network then you can always buy a midspan converter that works in the same way that a power supply unit would.
You can mount these clocks in any way that you like. You can choose to wall mount it (most of the Digital wall clocks will come with two pre drilled holes, some come with a more sophisticated mounting system). With some clocks you can even invest in a mounting kit that will allow you to suspend them from the ceiling.
You can mount a single digital wall clock using this kit or else, you can mount them back to back with two such clocks. These clocks are configurable according to time zones and daylight saving settings. They are very accurate and do not require any human intervention and have no requirement of any special hardware or software. The time updates take place automatically.
The accurate display is obtained from a NTP (network time protocol) or a SNTP (simple network time protocol). Both the NTP and SNTP can be internet/Intranet based. If you give your digital wall clocks an IP address then they will automatically synchronize with that IP's time settings.
The digital wall clocks can be provided in one or two display formats with four or six digit units. A four digit device will display hours and minutes only. A six digit device will display hours, minutes and seconds. The Ethernet NTP digital clocks can be configured for EU daylight savings using commands.
The LED digital wall clock comes with four or six digit formats. The four digit LED clock units display hours and minutes. The six digit units display hours, minutes and seconds. Both the LED clock units have 4 inch high LED digits. These digits can be read easily even from far distance of 50m.
Most of these clocks will have PoE (power over Ethernet) so in the event of a power shortage you won't lose time. It also makes installation easier. The clock takes the power from a CAT5 network cable and doesn't need a mains outlet near it.
If you have a network that supports PoE then you can simply plug the clock in and begin to use it. If you do not have a PoE network then you can always buy a midspan converter that works in the same way that a power supply unit would.
You can mount these clocks in any way that you like. You can choose to wall mount it (most of the Digital wall clocks will come with two pre drilled holes, some come with a more sophisticated mounting system). With some clocks you can even invest in a mounting kit that will allow you to suspend them from the ceiling.
You can mount a single digital wall clock using this kit or else, you can mount them back to back with two such clocks. These clocks are configurable according to time zones and daylight saving settings. They are very accurate and do not require any human intervention and have no requirement of any special hardware or software. The time updates take place automatically.
About the Author:
If you are still in doubt to get digital wall clocks, please visit my digital wall clock site to know why you should get it. At my site you will also find additional articles about how to choose the ideal digital wall clock, how to keep your jumbo digital wall clock in top shape and much more!
No comments:
Post a Comment