To instantly make your home look beautiful, install a new floor. Whether you plan to sell your home, or just want it to look better for yourself, replacing an old, damaged floor is the quickest way to update. There is a huge selection of materials available on the market from which to select.
You no longer have to mess with smelly, difficult to manage mastic adhesive. Peel and stick vinyl tiles make the job an easy one, and will be quick to install. With the many different colors available, there is any number of designs that can be installed. Even an amateur installer can do a great job.
These new flooring materials are durable and much more flexible than in the past. There is a large selection of bright, cheerful colors available. No longer is the installer limited to a few dull, neutral colors. There are enough colors to please just about anyone. This large selection allows the installer to make intricate designs, including checkerboard and bordered designs.
It is not difficult or time-consuming at all to install this new flooring. Start with a 1/4" plywood layer to which you have used leveling compound and sanding to provide a smooth, level under layer to which the adhesive will adhere well. Any shoe molding, door jambs or other architectural impediments should be removed or cut down to fit. Stagger joints of the under layer so that there are not long, visible seams under the flooring.
Divide the entire floor evenly into fourths, marking them off so you can find the exact center of the floor. Start tiling just to one side of the intersection of the vertical and horizontal lines, butting the edges against the marking. This prevents there being an awkward gap right in the middle of your floor when you are finished. Carefully work outward from the center within each quadrant.
Eventually, near the wall, you will have a space that won't fit an entire piece. This will mean cutting it to fit. To measure it, lay a whole piece over the last installed one, butting edges. Lay another piece butting against the wall and overlapping the loose piece. Cut the tile that is underneath, following the edges of the top one, and you will have a perfect fit that will slide easily into the remaining space near the wall.
When you are finished laying all your floor, go back and cut out an openings that have been covered, such as those for heat registers and such. You can use a very sharp utility knife or a tile cutter so that you can get a smooth edge. Be careful and use a slow, steady motion so as not to break o tear you newly laid flooring. Replace covers, shoe molding, and anything else you had to remove. Replace anything that was damaged with new materials.
After putting everything away, do a light damp mopping of the floor to remove any construction dust. Then, all that remains is to sit back and enjoy your new floor. You should have many years of enjoyment to come. Save a few tiles and you can repair any future damage, keeping your floor in great condition for a long time.
You no longer have to mess with smelly, difficult to manage mastic adhesive. Peel and stick vinyl tiles make the job an easy one, and will be quick to install. With the many different colors available, there is any number of designs that can be installed. Even an amateur installer can do a great job.
These new flooring materials are durable and much more flexible than in the past. There is a large selection of bright, cheerful colors available. No longer is the installer limited to a few dull, neutral colors. There are enough colors to please just about anyone. This large selection allows the installer to make intricate designs, including checkerboard and bordered designs.
It is not difficult or time-consuming at all to install this new flooring. Start with a 1/4" plywood layer to which you have used leveling compound and sanding to provide a smooth, level under layer to which the adhesive will adhere well. Any shoe molding, door jambs or other architectural impediments should be removed or cut down to fit. Stagger joints of the under layer so that there are not long, visible seams under the flooring.
Divide the entire floor evenly into fourths, marking them off so you can find the exact center of the floor. Start tiling just to one side of the intersection of the vertical and horizontal lines, butting the edges against the marking. This prevents there being an awkward gap right in the middle of your floor when you are finished. Carefully work outward from the center within each quadrant.
Eventually, near the wall, you will have a space that won't fit an entire piece. This will mean cutting it to fit. To measure it, lay a whole piece over the last installed one, butting edges. Lay another piece butting against the wall and overlapping the loose piece. Cut the tile that is underneath, following the edges of the top one, and you will have a perfect fit that will slide easily into the remaining space near the wall.
When you are finished laying all your floor, go back and cut out an openings that have been covered, such as those for heat registers and such. You can use a very sharp utility knife or a tile cutter so that you can get a smooth edge. Be careful and use a slow, steady motion so as not to break o tear you newly laid flooring. Replace covers, shoe molding, and anything else you had to remove. Replace anything that was damaged with new materials.
After putting everything away, do a light damp mopping of the floor to remove any construction dust. Then, all that remains is to sit back and enjoy your new floor. You should have many years of enjoyment to come. Save a few tiles and you can repair any future damage, keeping your floor in great condition for a long time.
About the Author:
You can visit ritzpah.com for more helpful information about Easily And Quickly Install A New Floor With Peel And Stick Vinyl Tiles.
No comments:
Post a Comment