This type of windows is the strongest advancing. There are two types. One where the bulk of window wood with a shell of aluminum on outer side, and one in which the majority is aluminum with a shell of wood on the inside. What type is best, is difficult to judge, but it is important to establish ventilation between the two materials. Otherwise, water vapor accumulates behind the aluminum and lead to advice in tree (interior plantation shutters for sale online).
Pros: Nice touch (timber section). Simple maintenance, no or almost no paint on the outside, the ALU is ready painted with polyester paint factory. Relative simple mounting bracket. Slim profiles. Cons: A wrong design can arise advice in wooden part and that there may be thermal bridges with associated dew or water problems inside. If the aluminum is damaged, it is a little difficult to repair.
The connection to building is done with the help of so-called cock, which belong to category of window shutter fittings. The best current state assembly is in soffit. Here, the shutter closes almost flush with the masonry. The gaps are between shutter and reveal only about 4 mm. In contrast, the Bavarian stop between 5 cm and 7 cm. In addition Mounting in reveal an additional burglary protection, since the window or window shutter in closed state can not be undermined upwards out of cock, because he comes after 4 mm up against the soffit.
Strong profiles are "stealing" of light. Large expansion coefficient, which can cause problems when solar heating of window. Pure aluminum windows are preferably used for buildings of business or industry. There is non-insulated and insulated profiles. The uninsulated used exclusively inside buildings as facades of shops in shopping centers or similar. The isolated profiles mostly used for windows, bay windows and skylights.
Pros: Clean metal, therefore, no advice. Little or no maintenance. Cons: Uncomfortable cold to touch. Can cause problems with condensation on the inside. Right vulnerable to mechanical impact. Skylight seen with thermal IR camera. There where there is the greatest heat conduction is coldest in camera image. In Nordic ancient houses where there was undivided space right up under the roof, called the part of roof surfaces, wind. On the south side sat a light opening: the wind. As the wind and living room separated by a floor, the room became dark. It had probably always had small portholes or peepholes closed with sliding panels or wooden plugs.
They were only closed with a membrane, thus avoiding putting them in walls. Still have some old farmhouses all windows toward the yard. Thus, also in ancient time. Here served window just as much to obtain air as to provide light. In addition regards defense played the glass preciousness also a role in size of window, so that with some justification can say that the smaller the window of house, the older it is.
It was in churches that the first glass panes were seen because glass mongering by the Roman Empire's collapse went over to church's custody. Alexandria had before Emperor always been the headquarters for the glass industry in Egypt was ancient. There puffed and cast glass, and when the cast panes appeared in 17th century in France, it was only a rediscoveries.
The Romans had greenhouses in glass. But the ancient art diligence had to be partially reinvented for church use. In 11th century this was completely implemented and Theophilus, presbyter and monk, wrote his famous work on ecclesiastical art diligence that is as comprehensive and precise that it must rely on experience from Roman times.
Pros: Nice touch (timber section). Simple maintenance, no or almost no paint on the outside, the ALU is ready painted with polyester paint factory. Relative simple mounting bracket. Slim profiles. Cons: A wrong design can arise advice in wooden part and that there may be thermal bridges with associated dew or water problems inside. If the aluminum is damaged, it is a little difficult to repair.
The connection to building is done with the help of so-called cock, which belong to category of window shutter fittings. The best current state assembly is in soffit. Here, the shutter closes almost flush with the masonry. The gaps are between shutter and reveal only about 4 mm. In contrast, the Bavarian stop between 5 cm and 7 cm. In addition Mounting in reveal an additional burglary protection, since the window or window shutter in closed state can not be undermined upwards out of cock, because he comes after 4 mm up against the soffit.
Strong profiles are "stealing" of light. Large expansion coefficient, which can cause problems when solar heating of window. Pure aluminum windows are preferably used for buildings of business or industry. There is non-insulated and insulated profiles. The uninsulated used exclusively inside buildings as facades of shops in shopping centers or similar. The isolated profiles mostly used for windows, bay windows and skylights.
Pros: Clean metal, therefore, no advice. Little or no maintenance. Cons: Uncomfortable cold to touch. Can cause problems with condensation on the inside. Right vulnerable to mechanical impact. Skylight seen with thermal IR camera. There where there is the greatest heat conduction is coldest in camera image. In Nordic ancient houses where there was undivided space right up under the roof, called the part of roof surfaces, wind. On the south side sat a light opening: the wind. As the wind and living room separated by a floor, the room became dark. It had probably always had small portholes or peepholes closed with sliding panels or wooden plugs.
They were only closed with a membrane, thus avoiding putting them in walls. Still have some old farmhouses all windows toward the yard. Thus, also in ancient time. Here served window just as much to obtain air as to provide light. In addition regards defense played the glass preciousness also a role in size of window, so that with some justification can say that the smaller the window of house, the older it is.
It was in churches that the first glass panes were seen because glass mongering by the Roman Empire's collapse went over to church's custody. Alexandria had before Emperor always been the headquarters for the glass industry in Egypt was ancient. There puffed and cast glass, and when the cast panes appeared in 17th century in France, it was only a rediscoveries.
The Romans had greenhouses in glass. But the ancient art diligence had to be partially reinvented for church use. In 11th century this was completely implemented and Theophilus, presbyter and monk, wrote his famous work on ecclesiastical art diligence that is as comprehensive and precise that it must rely on experience from Roman times.
No comments:
Post a Comment